Creating the free energy device with Bashar

Moderators: Rokazulu, xplosiw, Alice

Fux
Posts: 12
Joined: Wed Sep 30, 2015 4:24 pm
Location: Hungary
Contact:

Re: Creating the free energy device with Bashar

Post by Fux » Tue Apr 10, 2018 7:54 am

Thank you!

Is this your design? https://www.shapeways.com/product/SK6ZU ... arketplace

I couldn't find the copper option on ShapeWays (https://www.shapeways.com/materials/material-status), so they don't use copper, do they? Silver is also a good conductor, but it's bloody expensive, of course :D

Is there a reason why you offer different material choices for the 12cm and 16cm versions? I would need a much smaller version for my project, I use 15mm antennas at the moment. Do you think a 1.5cm version would be printable at all?

Also, your model is hollow as you mentioned, but it might worth a try to have it in it's original fractal form, like this: http://pre07.deviantart.net/b3a0/th/pre ... ve1008.jpg Do you have a 3D model like this by any chance?

I could compare the receptivity of those versions with my device in the 0.25Hz - 500kHz range.

(PS: I tried to donate you a small amount on Thingiverse, but the system didn't allow me, you need to set it up, I think. Let me know if you accept cryptocurrencies, I would be glad to send you some.)

ialmostforgot
Posts: 44
Joined: Thu Jan 12, 2017 5:09 pm

Re: Creating the free energy device with Bashar

Post by ialmostforgot » Tue Apr 10, 2018 9:51 am

Yeah that's my first design. The second one (https://www.shapeways.com/product/SFZVC ... a-ii-16-cm) I made it with a different program, but it's pretty mcuh the same thing.

No, they don't work with copper at Shapeways. That's why, among other things, I offered these models as a download.

The materials is not so much something I control: when I upload a model I usually check for it to be in all materials possible, but then the Shapeways programs decide, according to the model, which materials are possible for it to be printed.

I can try to make a 1,5 cm version, but the smaller the model, the less detail I can offer (it affects the thickness as well). In this case the sierpinski would have to be a level 2 or something. But then again, you have some of those tiny sierpinski merkabas already at Shapeways.

I can make the original fractal form, for sure. I just had the feeling that the wire version would conduct better.

Ok, I'm going to make that "original" version. I'll give you the link when it's ready.

I saw the donation try at thingiverse, that's very kind of you. I'm not going to set it up for now. You know, it's not even my design, I just put it together.

Edit:
I made the 1.5 cm one. ---> https://www.shapeways.com/product/LB44M ... d=65232492
As expected, I had to downgrade it to a level 3 sierpinski gasket and also make it sturdier/thicker.

User avatar
AlwaysBeNice
-
Posts: 1414
Joined: Fri Aug 07, 2015 10:22 am

Re: Creating the free energy device with Bashar

Post by AlwaysBeNice » Tue Apr 10, 2018 8:27 pm

Yay, finally people working on it again, best of luck!
Best evidence for UFOs: http://www.bestUFOevidence.com
Evidence for the soul http://www.evidenceforthesoul.com
The experiences that verified Bashar for me: bashar-forum.org/viewtopic.php?f=2&t=7

Fux
Posts: 12
Joined: Wed Sep 30, 2015 4:24 pm
Location: Hungary
Contact:

Re: Creating the free energy device with Bashar

Post by Fux » Wed Apr 11, 2018 6:23 am

@ialmostforgot Thanks a lot! It looks pretty cool :)

I'll order the 1.5 cm version in the next few days, I just want to check the conductivity values of brass (copper+zinc), bronze, nickel and steel versions as well.

Is this (https://www.thingiverse.com/thing:2855985) the 3D model of it?

@AlwaysBeNice Thank you, and let me know if you liked to join the project in any way :)

ialmostforgot
Posts: 44
Joined: Thu Jan 12, 2017 5:09 pm

Re: Creating the free energy device with Bashar

Post by ialmostforgot » Wed Apr 11, 2018 8:06 am

Yes, yesterday I first tried the Sierpinski level 4, but Shapeways would not accept a print of it at 1.5 cm. So instead of deleting the file I uploaded it at thingiverse: https://www.thingiverse.com/thing:2855953

Then I went for the level 3 sierpinski, but that version (the one you linked) was still too thin for a 1.5 cm printed copy at Shapeways. So instead of just deleting it I uploaded it to thingiverse.

And finally I made the version for Shapeways (I had to make thicker walls).

I was checking your site yesterday, so your device is some kind of reader of bioenergy fields right?

Fux
Posts: 12
Joined: Wed Sep 30, 2015 4:24 pm
Location: Hungary
Contact:

Re: Creating the free energy device with Bashar

Post by Fux » Wed Apr 11, 2018 12:58 pm

Yes, the device reads very weak energy fields around us (including our own body's) and displays it on a computer. Every antenna is digitized separately, processed and displayed at a later stage. This will result an image called "hyperspectral image", meaning that it will make the invisible waves/fields visible using red/green/blue colors on the screen, similarly to the heat-maps of an infrared camera.
The end result will look something like this: http://www.lboro.ac.uk/service/publicit ... _front.jpg.
It would potentially show us health issues or even that if you are not in a balanced state mentally.
The lower limit of the device's frequency range is our very deep sleep state (0.4Hz), so it would detect the different sleep cycles and even lucid dream states, the upper limit will also cover the frequencies Bashar reads sometimes during his sessions, when people ask him about their signature frequency (up to 250kHz). ;)

Btw, I don't want to discard your idea of the hollow shape as an antenna, could you make a level 2 version of the hollow as well (the level 3 version might be not printable at the small scale)? If you could upload that to Shapeways, I could test that as well and compare the results.

Thank you!

ialmostforgot
Posts: 44
Joined: Thu Jan 12, 2017 5:09 pm

Re: Creating the free energy device with Bashar

Post by ialmostforgot » Wed Apr 11, 2018 3:20 pm

Sounds really cool.

I made it hollow because Bashar said that each side of the tetrahedron had to be made as a sierpinski gasket.

Something that intrigues me is that he also said that this space-time antenna forms "the bones of it", implying that this could be improved in a more complex fashion. Or maybe I'm reading too much into it.

I'll make that version today or tomorrow, cheers.

Edit: I haven't been able to produce a hollow version that's 1.5 cm, sorry.

Fux
Posts: 12
Joined: Wed Sep 30, 2015 4:24 pm
Location: Hungary
Contact:

Re: Creating the free energy device with Bashar

Post by Fux » Tue Apr 17, 2018 9:21 am

Oh, I'm sorry to hear that the small hollow version is not possible.

I've made some calculations and I decided that I will order the silver and bronze versions of your model.
I'll keep you guys posted with my measurement results.

TheInventor
Posts: 528
Joined: Wed Jan 04, 2017 10:40 am

Re: Creating the free energy device with Bashar

Post by TheInventor » Wed Apr 25, 2018 10:37 am

I have posted oscope reading of a ZPE device on my facebook page, its a extrapolation of Bashar Tech, and it does not use Fractal Antenna's I have not found a good enough 3d printer to do the printing of fractals that I want. I thought you guys would like to see the testing results

https://www.facebook.com/photo.php?fbid ... =3&theater

Fux
Posts: 12
Joined: Wed Sep 30, 2015 4:24 pm
Location: Hungary
Contact:

Re: Creating the free energy device with Bashar

Post by Fux » Sat Apr 28, 2018 11:06 am

TheInventor wrote:
Wed Apr 25, 2018 10:37 am
I have posted oscope reading of a ZPE device on my facebook page, its a extrapolation of Bashar Tech, and it does not use Fractal Antenna's I have not found a good enough 3d printer to do the printing of fractals that I want. I thought you guys would like to see the testing results

https://www.facebook.com/photo.php?fbid ... =3&theater
John, could you tell us more about the measurements? What is the ZPE device exactly and what did you measure?


I received the small fractal antennas from Shapeways yesterday, look how beautiful they are! :P

Image

I'm working on the PCB of the 6th prototype at the moment, but as soon as I got it ready for fabrication I will focus on these antennas, so I will post you guys some results soon ;)

ialmostforgot
Posts: 44
Joined: Thu Jan 12, 2017 5:09 pm

Re: Creating the free energy device with Bashar

Post by ialmostforgot » Sat Apr 28, 2018 5:56 pm

I received the small fractal antennas from Shapeways yesterday, look how beautiful they are! :P

Image

I'm working on the PCB of the 6th prototype at the moment, but as soon as I got it ready for fabrication I will focus on these antennas, so I will post you guys some results soon ;)
Wow they look lovely, so glad they turn out ok. Can I use this picture in my shop?

Looking forward to the results you get, cheers.

Fux
Posts: 12
Joined: Wed Sep 30, 2015 4:24 pm
Location: Hungary
Contact:

Re: Creating the free energy device with Bashar

Post by Fux » Tue May 01, 2018 1:21 pm

@ialmostforgot: Absolutely, use it if you like :) Drop me a line if you need others with different background and/or arrangement ;)

themaster
Posts: 822
Joined: Sun Oct 04, 2015 3:43 am

Re: Creating the free energy device with Bashar

Post by themaster » Sun May 06, 2018 10:23 am

AlwaysBeNice wrote:
Tue Apr 10, 2018 8:27 pm
Yay, finally people working on it again, best of luck!
hey abn.. you are around I see..

So it seems like your time on awakened has fizzled.. what are you up to lately?
I really don't like signatures.. but here goes.. my public talk with b https://vimeo.com/218534595

bshr101
Posts: 81
Joined: Tue Sep 27, 2016 12:40 am

Re: Creating the free energy device with Bashar

Post by bshr101 » Tue May 22, 2018 10:25 am

Hey energy folks. This is my favorite thread on the bashar forum. But it is hidden from many people, due to being two or three sub-forums deep. I think that it deserves to be moved into a more visible place - potentially the front page.

8-)

Post Reply